Know nodes

Allbright Special (Shock leader)

Special Allbright is a node designed to join two lines of different diameter, so we can join shock leader, terminals nylon different thickness, but also Multifibre and metal. In some cases the line more, it may also be dubbed giving more substance to node but increasing the thickness. The Allbright has the advantage of being very filante and with a good grip, but on the other hand we must put meticulous attention to a realization perfect as a realization approximate seriously undermines the result.
 

1) Dub the largest wire for about 10 Cm., Alongside the more subtle with his head free to the bearing of line largest.

2) Wrap the thin wire around the pair more often with a dozen turns to fall towards the buttonhole formed by doppiatura. In forming the spire must be careful that they are firm and parallel, putting the greatest care not to overlap.

 3) Put the head free of line formed by the end nell'asola biggest line, and then push the buttonhole the spire just wrapped, still without overlap.

 4) Pull the bearing thin to tighten the spire, and the head alternately free up to the spire approach totally at the beginning of dub. The surplus of big line can be cut to zero, that thin 2 / 3 mm.

Node Rapala

It 'a node to buttonhole easy achievement, very strong, used to connect the computer to a minnow. For some types of artificial requires a node to buttonhole, since freedom of movement of artificial sull'asola itself allows a more natural movement.

 1) Run a simple node and passing the excess ends through the eye of minnow

 2) then through the node simple

 3) run two or three turns on the line

 4) passing the extremities first node simple

 5) then through the buttonhole created earlier

more >>

All right reserved - webmaster Santo Acciaro